Canon 3000 V User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focus Lock
After achieving focus, you can lock the focus on a subject and
recompose the shot. This is called “focus lock."
1
Set the camera to a Creative
Zone mode.
• Set a Creative Zone mode except
Select the desired AF point.
Focus the subject.
• Aim the AF point on the subject,
then press the shutter button
halfway.
4
Keep pressing the shutter
button haifway and recompose
the picture as desired.
Take the picture.
’ If focus has not been achieved, the focus confirmation light < A>
hi the viewfinder will blink. In this case, you cannot take a picture
even when you press the shutter button fully. Recompose the shot
and focus again or see “When Airtofocus Fails" (p.30).
' If you use an external, EOS-dedicated Speedlite and focus cannot
be achieved with the AF-assist light, seM the center AF point.
' Focus lock also works in the Basic Zone modes (except <%,>).
Just start from step 3 above.
29