Canon 3000 V - Manual (Page 28)

EEDSelecting an AF point
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you. In the Basic Zone
modes and mode, the AF point selection is automatic only.
In the modes, the AF point can be
selected either automatically or manually.
• Automatic AF point Selection
The camera selects the AF point automatically according to
situation.
• Manual AF point Selection
You can select any of the seven AF points manually. This is best
when you want to be sure to focus on a particular subject, or to
compose a particular shot quickly.
•
Press the button. (S6)
► The current AF point will be
indicated on the LCD panel and in
the viewfinder.
Select the desired AF point.
• While looking at the LCD panel or
viewfinder, turn the dial.
• After selecting the AF point, press
the shutter button halfway. The
camera will then be ready to take
pictures.
Automatic AF Manual AF
Point Selection r ----------------------- Point Selection -----------------------------------
1
:«c ■ ¡i
Q
28