Canon 3000 V - Manual (Page 34)

Tv Shutter-Priority AE
In this mode, you set the shutter speed and the camera sets the
aperture value automatically to suit the subject brightness A fast
shutter speed can freeze the motion of a fast-moving subject and a
slow shutter speed can blur the subject to give the impression of
motion.
* > stands for Time value which is the shutter speed. * •
^ Turn the Mode Dial to .
2 Select the desired shutter
speed.
• Turn the dial.
• The shutter speed can be set in
half-stop increments.
3 Focus the subject.
► The aperture value is set
automatically.
4 Check the viewfinder display
and take the picture.
• If the aperture value display is not
blinking, a correct exposure wiii be
obtained.
1000
C • D 'Til’
f5--------I.CT
(I
Ш
• If the maximum aperture value blinks, it indicates
underexposure. Turn the <^2l> dial to set a
slower shutter speed urrtil the blinking stops.
• If the minimum aperture value blinks, it indicates
overexposure. Turn the dial to set a faster
shutter speed until the blinking stops.
Shutter Speed Display
The shutter speeds from “ SODD ” to “ i' indicate the denominator of
the fractional shutter speed. For example, “ liS " indicates 1/125
sec. Also, “0"T ” indicates 0.7 sec, and “ 15" " indicates 15 sec.
34