Canon E 200 User Manual
E200, Canon
Table of contents
Document Outline
- Canon E200
- Table of Contents
- Camera Parts and Functions
- WL-50 Wireless Controller
- Viewfinder Dispiays
- Power Sources
- Attaching Battery Pack BEI
- 1. Slide battery pack into power source compartment.
- 2. Press battery pack until it clicks and locks In place.
- Removing Battery Pack BB3
- 1. Slide and hold ВАТТ EJECT switch up.
- 2. Pull battery pack out, as shown.
- Charging Battery Pack
- Using AC Power
- CA-100 Compact Power Adapter
- Using Car Battery
- CB-110 Car Battery Adapter (option)
- N Attaching DC Coupler
- 1. Insert D0100 DC Coupler into power source compartment.
- 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
- Inserting New Lithium Battery
- Setting Date and Time
- 0
- 3. Press + and - buttons to scan year display.
- 4. Press SHIFT button when correct year is shown.
- 5. Press + and - buttons to scan month display.
- 6. Press SHIFT button when correct month is shown.
- 7. Press + and - buttons to scan day display.
- 8. Press SHIFT button when correct day is shown.
- 9. Press + and - buttons to scan hour display.
- 10. Press SHIFT button when correct hour is shown.
- 11. Press + and - buttons to scan minute
- display.
- 12. Press DATE button when correct minute is shown.
- Camera Preparations
- Attaching Strap
- SS-300 Shoulder Strap
- WS-20 Wrist Strap (option)
- Adjusting Diopter 25-a
- Adjusting 180 FtexiGrip with Integral Electronic Viewfinder 25-b
- Sports Finder 25-c
- 2.
- Attach power source.
- Turn camera on.
- Press A (EJECT) button.
- Load video cassette and close video cassette compartment.
- Press l^/LP button to select tape mode.
- Turn grip to desired position.
- 7. Press start/stop button.
- 8. Press start/stop button again to temporarily pause recording. ^0
- 9. When recording has ended, press A (EJECT) button.
- 10. Remove video cassette and close video cassette compartment again.
- 11. Turn camera off.
- Video cassette erasure prevention switch
- Tape Counter
- Recording Reminder
- Record Search
- Record Review
- Edit-erase
- Recording Date and Time
- 1. While recording or in record pause mode, press DATE button. Biffl
- 2. Press DATE button again to end date and time recording.
- Autofocus
- Subjects Not Suitable for Autofocus
- Manual Focus
- 1. Press FCX^US IS/M button to select manual focus.
- 2. Rotate zooming lever to telephoto end.
- 3. Look through viewfinder and rotate focusing ring to focus on subject.
- 4. Use zooming lever to frame subject properly.
- Focus Lock
- 1. Press FOCUS IS/M button to select manual focus.
- 2. Rotate zooming lever to wide-angle end.
- 3. Press and hold macro button on zooming lever and move lever into macro range.
- 4. Approach subject to desired size in viewfinder.
- 5. Use zooming lever within macro range for fine focusing.
- 6. When macro recording is completed, reverse steps 2 and 3.
- Power Zoom 4o-a
- Manual Zoom 4o-b
- Wireless Zoom 4o-c
- Shooting with Video Light
- Attaching Video Light 4i-a
- 1. Insert video light plug into accessory shoe on the camera.
- 2. Slide video light into accessory shoe until it stops.
- Removing Video Light 4i-b
- 1. Press and hold lock release button.
- 2. Slide video light out of accessory shoe.
- Replacing Bulb 43-a
- 1. Rotate the protector In the indicated direction.
- 2. Puli out the old bulb.
- 3. Insert a new bulb positioning the notch at the bottom.
- 4. Rotate the protector in the indicated direction.
- Gain-up/Backlight Compensation
- High-Speed Shutter
- Fade
- Adding Titles to Recordings
- Creating Character Titles
- 1. Place camera in record pause.
- 2. Press CHARACTER TITLE button for more than 3 seconds to display title lines in viewfinder.
- 3. Press SHIFT button to move the cursor to
- position where you want to start the title. BHa
- 4. Use -I- and - buttons to scan list of title characters.
- 5. When the character you want is displayed, press SHIFT button again to move to next cursor position.
- 6. Follow steps 4 and 5 until your title is complete.
- 7. When the title is finished, press CHARACTER TITLE button. BQ
- Playback Connection
- Using TV with Audio/Video Input Terminals
- Connection Procedure
- Using TV with SCART Terminal
- Connection Procedure Rgil
- Selecting Vídeo Channel (European model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press ■ (STOP) button to select playback mode.
- 4. Press A (PLAY) button to start playback.
- 5. Set RF unit’s G/l selector using flat-edge screwdriver.
- 6. Set TV and video channei selector to video channei (video channel selector is factory-set to CH 32).
- Using TV without Audio/Video Input Terminals (Australian Model)
- Selecting Vídeo Channel (Australian model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press ■ (STOP) button to select playback mode.
- 4. Press M (PLAY) button to start playback.
- 5. Set TV and video channel selector to video channei (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
- Playback Procedure
- 1. Turn camera on.
- 2. Press A (EJECT) button.
- 3. Load video cassette in camera and close video cassette compartment.
- 4. Press ■ (STOP) button to select playback mode.
- 5. Locate playback start point.
- 6. Press PLAY button to start playback.
- 7. Press ■ (STOP) button to end playback.
- 8. Turn camera off.
- High-Frequency Feedback
- Special Playback Methods
- Tape Return
- Editing to Another VTR
- 1,6
- Canon E200 Video System Chart
- Carrying Cases
- Optional Accessories
- Problems and Troubleshooting
- Condensation (DEW)
- Cautions
- During Use
- F. Always Replace the Lens Cap.
- G. Do Not Expose the Camera to Shock or Vibrations.
- H. Avoid Sudden Changes in Temperature.
- I. Do Not Disassemble the Camera.
- J. Using the Battery Pack and Recommended Accessories.
- Using Your Battery Packs Effectively
- immediateiy After Purchase
- General Use
- storage
- Terminology
- Maintenance
- Keep the Heads Clean.
- Clean the Camera with a Soft, Dry Cloth.
- Store the Camera Properly.
- Store Cassette Tape Properly.
- Check the Operation of Each Component.
- Specifications