Condensation (dew), What is condensation, Condensation is iikeiy to occur when – Canon E 200 User Manual
Page 75: Preventing condensation, When condensation is detected, To start using camera again
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Condensation (DEW)
B
What is condensation?
Condensation (DEW) means tiny droplets of
water that occasionaily form on the camera
surface when it is mo^ from a cold place to a
warm place. Using the camera when
condensation is present may damage both tape
and camera.
Condensation is iikeiy to occur when:
A.
Camera is brought from a cold place to a
warm place.
B.
A cold room is heated rapidly.
C. Camera is taken from an air-conditioned room
to a wann and humid place.
D.
Camera is placed in a humid environment
Preventing condensation
Remove video cassette ar)d place the camera in
a plastic bag prior to bringing it into a warm area
where oorKlensation is iikeiy to occur. Wait until
the camera reaches room temperature before
removing it from the bag.
When condensation is detected
When condensation is detected in the camera,
the OPERATE indicator flashes, “DEW” flashes
in the viewfinder and the tape automaticaily
stops.
Immediately remove video cassette, leave video
cassette compartment open and turn camera off.
Leave the camera in a dry place until
condensation evaporates.
• Sometimes “DEW” may not appear in the
viewfinder until 10-15 minutes after
condensation has fornied.
To start using camera again
Even when “DEW’ and the OPERATE indicator
no longer flash when the camera is turned on,
wait at least one more hour before attempting
operation. The time required for condensation to
dear varies with surrouridir^ conditions; it can be
as long as 1 hour.
>
o
o
o
z
>
o
XI
s
5
o
75