Canon 540EZ - Manual (Page 38)

Setting the Firing Frequency, No. of Bursts, and Power
Level
"I Set the flash mode to MULTI
(stroboscopic flash) mode.
Zoom. S 0 mm
MULT)_S— S h z
OSi.T 1 tJi i ^ m
Each press of the Select/Set
button changes the blinking
display in the LCD panel in
the cycle shown below. Each
number setting can be
changed while it is blinking.
Firing frequency —> No. of bursfs ^ Power level
--------------- Enfire display steadily lit <-------------
□
Press the Plus button or
Minus button to change the
blinking number as desired.
Press the Select/Set button
again. The current setting
stops blinking, and the next
setting in the cycle starts
blinking.
• The number will automatically
stop blinking and be set if 8
seconds elapse before fhe
Select/Sef buffon is pressed.
20