Canon 540EZ User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press the Select/Set button.

• The flash output level blinks in

the flash unit's LCD panel.

* •

''Sooi it} mm

7 H

______ V

0.50.7 l i s a 3 a ift 0 1310 n

While watching the flash unit’s
LCD panel display, press the

plus button or minus button to

set the desired flash oufput
level amounf.

• Each press of the Plus button

or Minus button increases or
decreases the output level by

fstop.

Press

the

Select/Set

button

again so that the output level
display stops blinking.
• The output level will automati

cally stop blinking if 8 seconds
elapse before the Select/Set
button is pressed.

If the flash has been fired 15 times continuously at 1/1 or 1/2 power, allow the

Speedlite to rest for 15 minutes to prevent the flash head from overheating.

Overheating can cause the flash head to breakdown.