Mounting the flash – Canon 540EZ User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Mounting the Flash

Turn

the

lock

nut

several

times In the direction of the

arrow to loosen.

Slide the flash unit’s mounting

foot fully Into the camera’s

accessory shoe until it stops.

Turn the lock nut in the oppo
site direction to secure the

flash firmly to the accessory

shoe. (The lock pin protrudes

from the bottom of the foot to

lock the flash in place.)
• To remove the flash, loosen the

lock nut by turning it ali the way
until it stops, then slide the

mounting foot out of the acces
sory shoe.

Even though lock pin holes are not provided on the EOS 650, EOS 620, EOS 750

or EOS 850, the 540EZ can be mounted without any problem.