Mid-roll film change, Rewinding a film cartridge in mid-roil, Press the s-js film rewind – Canon IXUS Z70 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mid-roll Film Change
This camera supports one of the most useful features
of the Advanced Photo System, mid-roll film changing.
This feature automatically advances the film to the first
unexposed frame if a partially exposed film cartridge is
loaded in the camera. You can then continue taking
pictures until the cartridge is completely exposed. This
allows you to use separate film cartridges for different
types of subjects, or moods.
Rewinding a film cartridge in mid-roil
Press the
S-JS
film rewind
button.
• The film starts to rewind.
• Check that the film has fully
rewound (
O
on the LCD pahel
blinks) and remove the cartridge
• The visual exposure indicator on
the cartridge changes to
D
(partial).
itC MRC :
MRC
MID ROLL CHANGE
•
• If i) on the LCD panel and the frame counter blink
during film rewind, it means that there was an error
during film rewind. If this happerts. remove and reload
the camera battery, then press the film rewind
button again, tl the camera still does not ope rale, turn
off the camera and taka the camera to your nearest
Canon service facility.
0-50