Q loading the battery, Load the new battery, H] loading the battery – Canon IXUS Z70 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[Q Loading the Battery

Battery: One lithium battery (CR2)

Open the battery cover.

• While pressing the

mark on the battery cover,

slide the battery cover off

Load the new battery.

• Insert the battery with the +

and - terminals positioned
correctly.

li^ is displayed on the

LCD panel.

Close the battery cover.

• Slide the battery cover

closed.

^ If"............" blinks in the LCD

panel, after you change

the battery, you will need

to reset the date to the

correot date and time (—>
46).

• * After removing the battery to replace it, do not touch

any of the switches on the camera. This will allow the
date and time settings to be retained for
approximately five seconds.

015