Turning the power on, Checking the battery power, Battery check indicator – Canon IXUS Z70 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turning the Power On
Checking the Battery Power
Check that is displayed on the LCD panel
when the power is turned on.
Shooting capacity with a new battery - Approx. 8
film cartridges of 25 exposures with 50% flash use.
(Data based on Canon’s Standard Test Method.)
Battery Check Indicator
(Lit):
Battery is full
EZi (Lit):
Have a new battery ready
-irbi- (Blinks): Replace the battery (-> 15)
* •
0
>
Use one lithium battery (CR2).
>
Before shooting, be sure to check the battery
power
• When traveling or planning to take many pictures,
be sure to take a supply of spare batteries, they
may not be available where you are.
■ Shooting continuously with the flash will cause the
battery power to fall momentarily, and the LCD
panel display may be incorrect. Turn the power off
and wait a while before turning It back on.
0-20