Nikon Camera N90 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press Qii button and im button to start film rewind. During

film rewind, Q _ appears on LCD panel, and frame

counter counts backwards until rewind is complete.

• You can rewind film, before it reaches end of roll. In the same

manner.

• If film does not start rewind or if film rewind has stopped at

mid-roll, check battery power. If battery power is insufficient,

turn power switch off, replace batteries with a fresh set, turn

power on, then press the film rewind and film speed
setting/film rewind buttons again to restart film rewind.

• Do not open the camera back during film rewind. If the

camera back is opened, film rewind will stop at mid-roll; to

restart film rewind, press the Qi; and §5 buttons again.