Nikon Camera N90 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

g Gently close camera back until lock

releases snap closed.

Fully depress shutter release button

to advance film to frame #1.

• If non-DX-coded film or film with an

unacceptable DX code is loaded, the

£ r r, ISO and EQ marks in the LCD

panel blink, the beeper sounds (if set),

and the shutter is locked. Set ISO
speed manually (see p. 100).

panel.

Confirm frame counter shows ! and

Q__ symbol appears on LCD

> If film is incorrectly positioned, £

remains, Q_ symbol blinks and shutter

is locked. Open camera back and
reload film properly.