Nikon Camera N90 User Manual

Page 200

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• For multiple flash photography using the N90, if the electric

current in the syncro circuit exceeds a certain ievei, you may
not be able to take a second shot after taking the first shot.

Take care that the combined total of the coefficient (numbers

shown in parentheses below) for all Speedlights used at any
one time does not exceed 20 at 20°C/68°F or 13 at
40°C/104°F.

SB-23 (4)

SB-22 (6)

SB-19 (2)

SB-18 (16)

SB-15 (4)

SB-14 (1)

SB-25 (1)

SB-21 (4)
SB-17 (4)
SB-12 (1)

SB-24 (1)

SB-20 (9)

SB-16 (4)

SB-11 (1)

If you are unable to take a second shot, disconnect the
master Speedlight from the camera, or turn each of the

Speedlights off and on at once. This resets the circuits so you
can resume shooting.

This also applies when using any non-Nikon studio speedlight
system.