Nikon Camera N90 - Manual (Page 25)

Data Link System users
When activating Custom Reset with the Nikon AC-1E
card’s Customized Settings function, press and hoid the •
and • 0 buttons for two seconds to retrieve the Custom
Reset settings.
When one or more functions/options (including Custom
Reset) of the Customized Settings have been set, OKI
appears in the camera’s LCD panel*. To cancel the
functions/options of the Customized Settings and reset
your camera to the default setting (which will make
0003
disappear from the LCD), press and hold the • and • 0
buttons for more than four seconds until 0003 starts
blinking; then remove your fingers from the reset buttons
and press them again within two seconds. (0003 stops
blinking when the reset buttons are left untouched for two
seconds.)
filM also appears when “Store shooting data’’ is selected
and/or ’’Download stored data’’ is likewise selected in the
Memo Holder function. In this case, you also can make
0003 disappear from the LCD by following the instuctions
given above,
' When Custom Reset and/or “Simultaneous Lock of AF and AE’of User
Custom Option is set with the MF-26 attached to the camera, 0003
does not appear. To cancel Custom Reset or "Simultaneous Lock of AF
and AE“ with the MF-26, use the MF-26's(M^ button and the
camera's command dial. (For details, see the MF-26 's instruction
manual.)