Nikon N80 - Manual (Page 74)

I
Menu/Features of Custom Setting
—continued
¡c'.Command Dial functions (pages 53-57)
Options: C: Main-Command Dial for shutter speed; Sub-Command Dial for
aperture setting (initial setting)
!: Main-Command Dial for aperture; Sub-Command Dial for
shutter speed setting
Unlike the initial Command Dial functions, the Sub-Command Dial can be set
to select shutter speed (in Shutter-Priority Auto or Manual exposure mode)
and the Main-Command Dial to select aperture (in Aperture-Priority Auto or
Manual exposure mode).
iS.Film rewind (pages 29)
Options: C: High-speed film rewind (initial setting)
I: Quiet film rewind
Film rewind can be set to perform more silently as opposed to initial high­
speed film rewind setting. Film rewind speed of the high-speed film rewind is
approx. 15 sec. and quiet film rewind is approx. 23 sec. per 36-exposure film
roll with fresh batteries.
(W.Multiple exposure (page 64)
Options: Q: Single shutter release operation (initial setting)
!: Continuous shutter release operation
At initial setting, the shutter is released once each time the shutter release
button is fully depressed in multiple exposure (single frame shooting).
However, it can be changed to continuous shooting where the shutter can be
continuously released as long as the shutter release button is fully
depressed.
IS.Time delay for auto meter-switch-off (page 17)
Options S : 4 sec.
5 : 6 sec. (initiai setting)
S : 8 sec.
15 : 16 sec.
At initial setting, the exposure meter automatically turns off 6 sec. after
turning the power switch on or lightiy pressing the shutter release button.
However, it can be changed to 4 sec., 8 sec. or 16 sec. (Note that the usable
number of film rolls per batteries decreases with the longer delay time for
auto meter-switch-off since if consumes more power.)
74