Custom setting menu – Nikon N80 User Manual
Page 112
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Custom Setting Menu
Function
Options
i
1
Automatic film rewind at the end of film
roll
0:
Activated (initial setting)
1: Disabled
e
Reset to DX film speed setting for new
film
0:
Activated (initial setting)
1: Disabled
3
Bracketing order
D: Metered value, under, over (initial
setting)
I: Under, metered value, over
H
On-Demand Grid Lines superimposition
display
C: Not displayed (initial setting)
1: Displayed
5
Illumination for superimposition
0:
Automatically illuminated for low light
(initial setting)
1: Canceled
?: Always illuminated
8
Focus area selection
0: Normal selection (initial setting)
!: Enables successive rotation of focus
area selection
1
Auto Exposure Lock when shutter release
button is lightly pressed
0:
Disabled (initial setting)
1: Activated
8
Auto film loading when camera back is
closed
Q: Enabled (initial setting)
1:
Disabled
s
Closest-subject-priority Dynamic AF in
Single Servo AF
C: Enabled (initial setting)
1: Disabled
in
fU
Closest-subject-priority Dynamic AF in
Continuous Servo AF
C: Disabled (initial setting)
1: Enabled
1 1
f 1
AE-L/AF-L button
D: AE/AF simultaneous lock (initial setting)
1: Auto Exposure lock only
c": Autofocus lock only
3: Auto Exposure lock (remains locked
until button is pressed again)
S: AF operation only starts by pressing AE-
L/AF-L button
112