Nikon N80 - Manual (Page 51)

Flexible Program
In Auto-Multi Program, by rotating
the Main-Command Dial you can
change the combination of shutter
speed and aperture while maintaining
correct exposure. With this function,
you can shoot in Auto-Multi Program
as though you were shooting in
Shutter-Priority Auto or Aperture-Priority Auto. @ appears in the LCD
panel when the Flexible Program is used. To cancel the Flexible
Program, rotate the Main-Command Dial until § disappears, change the
exposure mode, turn the power switch off, use built-in Speedlight (page
82), or perform Two-Button Reset (page 76).
Program chart
The program chart shows exposure control in Auto-Multi Program.
With AF 50mm f/1.4D
With AF 180mm f/2.8D ED
With AF-S 300mm f/4D ED
EV range: EV 0-21
Aperture
f/1
f/1.4
f/2
f/2.8
f/4
f/5.6
f/8
f/11
t/16
f/22
f/32
> iV N 1» <5
/
/ / / / /
/
/
N*"
/ / /
•i?
/
7
/
/
/
/ \
/
/
/
7
•if
/
/ /
7
30" 15" 8" 4" 2" r 4 8 1 5 30 60 125 250 500100020004000
(ISO 100) I
Shutter speed
• There are limitations for minimum and maximum EV depending on the film
speed.
> In Matrix Metering, any EV above 16Vs is controlled to EV 16V3 when using
ISO 100 film.
51