Nikon N80 User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Closest-subject-priority Dynamic AF in Single Servo AF (page 40)
Options: £3: Enabled (initial setting)
!: Disabled
At initial setting, Dynamic AF Mode with Closest Subject Priority (page 40) is
activated when Dynamic AF mode is selected in Single Servo AF. However,
Dynamic AF Mode with Closest Subject Priority can be set to be disabled in
Single Servo AF
(£3.Closest-subject-priority Dynamic AF in Continuous Servo AF
(page 40)
Options: 0: Disabled (initial setting)
!: Enabled
At initial setting, selecting Dynamic AF in Continuous Servo AF does not
activate Dynamic AF Mode with Closest Subject Priority (page 40). However,
Dynamic AF Mode with Closest Subject Priority can be set to be activated in
Continuous Servo AF.
I I.AE-UAF-L button (page 44/58)
Options C: AE/AF simultaneous lock (initial setting)
I: Auto Exposure lock only
?: Autofocus lock only
3: Auto Exposure lock (remains locked until button is pressed
again)
S: AF operation only starts by pressing AE-I_/AF-L button
At initial setting. Auto Exposure and autofocus are locked simultaneously
when the @ button is pressed. However, it can be set to be locked
separately or exposure remains locked after removing your finger from the
button and released when the @ button is pressed again or picture is taken.
Also at initial setting, autofocusing starts when the shutter release button is
lightly pressed, but it can be set to activate when the @ button is pressed.
(In this setting, pressing the shutter release button lightly does not start
autofocusing.)
73