Load film – Nikon N80 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
Load Film
Turn the power switch on and
load DX-coded film. With DX-
coded film, film speed will be set
automatically (ISO 25-5000).
When the camera Is turned on,
film is loaded and the camera
back is closed, the film
automatically advances to the
first frame.
3.1
Turn the power switch on, confirm that the film
speed setting is set to E0, then open the camera
back by sliding the camera back lock release lever.
3.2
• If the film speed setting is not set to BH, see page 36.
Insert film from the bottom side and pull film leader
out to red index mark.
> Do not insert the film leader beyond the red index mark.
NOTE: Loading/removing filin__________________________
Shutter curtains are very thin. Do not
touch the shutter curtains with your finger
or the film leader.
20