Auto exposure bracketing – Nikon N80 User Manual

Page 61

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Auto Exposure Bracketing

I Auto Exposure Bracketing allow you to shoot in selected compensated

EV value

(maximum of

±2

EV)

shifting from the automatically set proper

exposure

(or selected exposure in Manual exposure mode)

for a selected number

of shots

(two or three)

each time the shutter is released. For example, this

is useful in selecting one shot out of several shots with Bracketed

exposures after processing the film, when the subject has pronounced
contrast in shooting with color slide film and where the latitude of the
proper exposure is minimal. Auto Exposure Bracketing can be
performed in any exposure mode.

Rotate the Main-Command Dial while pressing the

Auto Exposure Bracketing (¡¡Si button so 131 appears

in the LCD panel.

• When iSi appears, ^ starts blinking.
• Shutter speed and aperture in Auto-Multi Program, aperture in Shutter-

Priority Auto and shutter speed in Aperture-Priority Auto and Manual

exposure mode differ.

• In any of the exposure modes. Flash Exposure Bracketing and Auto

Exposure Bracketing are simultaneously performed when a Speedlight is
used.

Set the number of shots and compensated EV value

by rotating the Sub-Command Dial while pressing the

Auto Exposure Bracketing GSj button.

i-fPF) (¡.Sy

> See the table on the next page for the combinations of the number of shots

and compensated EV value.

This manual is related to the following products:

N80QD