HP 730 User Manual

Page 77

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Problem

does not take

1, . " i

when 1 press

!, iv

Possible cause

iThe camera is

i still saving the
i last picture you

i took.

! Images in the
! memory

! (internal or
¡card] may be

! corrupted.

¡Solution

(Wait a few seconds for the

(camera to finish processing the
(image, and then press the Shutter

(button.

(Format the memory. (See
i page 50)
i

imag® is

¡Your subject

i Use Macro mode for close-up

blurry.

! was too close to 1 shots. Do not try to get closer than
¡the camera

(the camera's minimum focus

i lens.

(range (See Using macro mode on
(page 36)

! You moved the i Hold the camera steady as you
! camera while

i press the Shutter button or use a

s you took the

i tripod.

j picture.

¡The light is low (In dim light, the camera requires
jand the flash is (a longer exposure. Use a tripod

i set to Flasl't Off.(to hold the camera steady,

(improve lighting conditions, or

(the flash To Flash On (see

(page 30).

sThe camera

(Use Focus Lock. (See page 23.)

(focused on the

(wrong thing, or

(was unable to
(focus.

chapter 7: Troubleshooting and support