Fnstoliing the software, Windows – HP 730 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fnstoliing the software
The camera software allows you to unload images from the
camera, view them, print them, and e-mail them. It also allows
you to configure the Share menu on the camera.
See Chapter 4: Using hp instant share on page 53 for
information about configuring the Share menu on the camera,
and diopter 5: Unloading, printing, and displaying images on
page 61 for information about connecting the camera to a
computer or printer.
NOTE A copy of this User's Manual is located on the
HP Photo & Imaging software CD. Look in the
\docs\Readme file on the CD to see where the manual in
your language is located.
Windows
NOTE For the HP Instant Share component of the HP Photo &
Imaging software to function properly on your Windows
computer, you must have installed at least Internet Explorer
5.01 on Windows 2000 or XP, or Internet Explorer 5.01
Service Pack 2 on Windows 98, 98 SE, or Me.
1 Close all programs and temporarily disable any virus
protection software running on your computer.
2 Insert the HP Photo & Imaging software CD into the CD
drive of your computer. The installation window
automatically appears.
NOTE If the installation window does not appear, click Start,
and then click Ron. Type X:\Setup.exe, where X is the
letter of your CD drive.
3 Click Next, and then follow the on-screen instructions to
install the software.
20
hp photosmart 730 series user's manual