Using burst mode, Using macro mode – HP 730 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Burst is used to take multiple pictures in a row as quickly as the
camera can.
1 Press the Mode button until the Burst Qi icon appears on
the Status LCD. If Live View is on, the icon also appears in
the Image Display.
2 Frame the subject and press the Shytter button all the way
down and hold it.
3 Flash is disabled and the camera takes pictures as quickly
as possible until the memory is full or the Shutter button is
released.
Using macro mode
You can use the Macro focus setting for taking close-up pictures
(from 0.1 m (4 inches) to 0.5 m (19.7 inches).
1 Press the Mode button until the Macro ® icon appears on
the Status LCD. If Live View is on, the icon also appears in
the Image Display.
2 Use the Image Display to frame the subject of the picture
(the optical viewfinder will not give you an accurate
representation of a picture taken in macro mode).
3 Press the Shutter button all the way down to take the picture.
Using burst mode
36
hp photosmart 730 series user's manual