HP 730 - Manual (Page 40)

t-k.ni:
Ci'-'slijt-
’'Veiyhlo'i
The following table helps explain the settings in more detail.
Icon Setting Description....................................................................
Average Camera uses the entire scene region to
^--- measure and calculate exposure. Use this
setting when you want everything in the
picture to be used equally when calculating
exposure.
Camera uses the center of the scene region to
measure and calculate exposure. This setting is
good to use when the subject is in the center of
the frame. Exposure will be based more on the
subject than on its surroundings. This is the
default setting.
spot Camera uses a small area in the center of the
scene region to measure and calculate
exposure. This can be useful in backlit scenes
or when the subject is very dark or light
compared to the rest of the scene. When using
this setting, press the Shutter button halfway
down to lock the exposure on the spot in the
center, then recompose the scene as desired.
If the new setting is anything other than the default setting of
Center-Weighted, the icon for the setting (in the table above)
will appear at the top of the Liw View screen.
The new setting remains in effect until it is changed again or
until the camera is turned off.
Q
42 hp photosmart 730 series user's manual