HP 730 User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

NOTE If your computer is running Windows XP, when you

turn on the camera in the next step, a dialog box may

appear that requests you to Select the program to iaunch

for this action. Simply click on Cancel to close this dialog

box.

3 Turn on the camera. The HP Image Unload software will

launch on your computer. It you have set the software to

automatically unload the images in the camera, the images

will automatically unload to the computer. Otherwise, in the

Welcome screen, click Start Unload. It there were any

images in the camera that were selected in the Share menu

for printing or HP Instant Share destinations, those actions

are started after the images have been unloaded to the

computer.

4 When the unload screen on the computer says Finished,

your images have been saved and shared. You can now

disconnect the camera from the computer.

NOTE To unload images to a computer that does not have the

HP Photo & Imaging software installed on it, change the

USB Configuration setting to Disk Drive in the Setup menu.

See USB configuration on page 69. This allows the

camera to appear as another disk drive on the computer

so that you can easily copy the image files from the

camera to the hard drive of your computer.

NOTE If you used a memory card in your camera, another

way to unload images from the card to a computer is to

use a memory card reader or one of the memory card

slots available in HP Photosmart printers. See the manual

for your HP Photosmart printer for instructions on how to

do this.

hp photosmart 730 series user's monual