HP 730 - Manual (Page 22)

Recording dips
1 Frame the subject for your video
in the viewfinder.
2 Press and release the Video
O button to start recording
video. Both the red viewfinder
light and the Video/Self-Timer light will turn on solid. A
video “EJi icon and a Time Remaining counter appear in the
Status LCD and at the top of the Image Display (if it is on).
NOTE If you have the Self-Timer mode on (see Using self timer
mode on page 35), the camera will start recording 10
seconds after you press the Qi button.
3 To stop recording, press the tJ button again.
The length of a video clip is limited only by the amount of
available memory. The camera calculates the Time Remaining
(mm:ss) counter based on the amount of available memory
(internal or memory card). The video ends when Time
Remaining reaches zero or the O button is pressed again.
After recording has stopped, the last frame of the video clip
remains on the Image Display for instant review. During this
time, the video clip is saved to memory unless you choose to
delete it by pressing the OK button.
NOTE Audio is automatically recorded with video clips.
24 hp photosmart 730 series user's manual