HP 730 User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Probie

! Battery voltage

i is too low for
icharging to

i start.

Possible cause

- t.

i The wrong AC
I power adapter

i is being used.

¡The batteries
¡are damaged

¡or bad.

The camera

does not

recognize that

there are no

batteries
installed.

The camera will not attempt to

charge batteries that may be
damaged or over-discharged.

Remove the batteries from the

camera and charge them in an
external battery charger, then try

them in the camera again. If this
does not work, it is likely that one

or more of the batteries are bad.

Purchase new NiMH batteries

and try again.

Use only the HP AC power

adapter approved tor use with

this camera. See Purchasing

camsra accessories on page 102.

NiMH batteries degrade over

time and can fail. H the camera

detects a problem with the

batteries, it will not start charging

or will stop charging prematurely.

Purchase new batteries.

Do nothing. The blinking is

harmless and should stop after
5-30 minutes.

Solution

hp photosmart 730 series user's manual