Removing dust from inside the viewfinder, To reattach the eyecup, Precautions – Sony CCD-TRV41 User Manual
Page 70: Camcorder operation, Maintenance information and precautions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance information and precautions
Removing dust from inside the viewfinder
(
1
)
Remove the screw with a screwdriver (not supplied). Then, while sliding the
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(
2
)
Clean the surface with a commercially available blower.
To reattach the eyecup
(1)
Align the groove on the eyecup with the • mark on the barrel.
(
2
)
Turn the eyecup in the direction of the arrow. Then replace the screw.
Precautions
Camcorder operation
• Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).
• For DC or AC operation, use the accessories recommended in this manual.
• Should any solid object or liquid get inside the casing, unplug the camcorder and
have it checked by a Sony dealer before operating it any further.
• Avoid rough handling or mechanical shock. Be particularly careful of the lens.
• Keep the POWER switch set to OFF when not using the camcorder.
• Do not wrap up the camcorder and operate it since heat may build up internally.
• Keep the camcorder away from strong magnetic fields or mechanical vibration.
• Do not push the LCD screen.
• If the camcorder is used in a cold place, a residual image may appear on the LCD
screen. This is not a maltunction.
• While using the camcorder, the back of the LCD screen may heat up. Lhis is not
a
malfunction.
58