To stop searching or scanning, If you do date search or date scan during playback, If you have erased or rewritten the index signal – Sony CCD-TRV41 User Manual
Page 50: To view pictures during searching or scanning, Notes on date search and date scan mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching the boundaries of recorded date
To stop searching or scanning
Press one of the following buttons. DATE, ►, ■, or
If you do Date Search or Date Scan during playback
While the camcorder is looking for the date, a fast forward or rewind picture is
displayed. Some noise is inevitable.
If you have erased or rewritten the index signal
The point at which the date changes may be out of position by about 10 seconds of
playback.
To view pictures during searching or scanning
Press ► and then press or
Notes on Date Search and Date Scan mode
• If a day's recording is not longer than 2 minutes, the camcorder may not accurately
find its boundaries.
• Date Search and Date Scan do not function on a tape recorded by a camcorder
without the Data Code function.