Changing the mode settings, Title pos* Page 26: Title1 set*/title2 set, Clock set, Items for vtr mode only, Edit (ccd-trv81 only), Dnr* (ccd-trv81 only)
Page 26: Title1 set*/title2 set, Clock set, Items for vtr mode only, Edit (ccd-trv81 only), Dnr* (ccd-trv81 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the mode settings
TITLE POS*
• Select CENTER to center the title in the picture.
• Select BOTTOM to position the title at the bottom of the picture.
TITLE LANG*
Select the language of the preset titles.
TITLE1 SET*/TITLE2 SET*
Store your own titles.
CLOCK SET*
Reset the date or time.
Items for VTR mode only
EDIT
• Select ON to minimize picture deterioration when editing.
• Normally select OFF.
HiFi SOUND
• Normally select STEREQ.
• Select 1 or 2 to play back a dual sound track tape.
TBC*
• Normally select ON, to correct for jitter.'
• Select OFE to not correct for jitter. The picture may not be steady when played back.
DNR*
• Normally select ON to reduce picture noise.
• Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.
• These settings are retained even when the battery is removed, as long as the lithium
battery is in place.
Note on TBC setting
Set TBC to OFF when playing back:
• A tape you have dubbed over.
• A tape on which you recorded the signal of a TV game or similar machine.
The following settings work only during playback
EDIT, HiFi SOUND, TBC, and DNR.
26