Writing the rc time code on a recorded tape, Ccd-trv81 only, To stop writing the rc time code – Sony CCD-TRV41 User Manual
Page 56: Tape (ccd-trv81 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Writing the RC Time code on a recorded
tape
- CCD-TRV81 only
You can write the RC time code on a recorded tape. Use the Remote Commander.
Before you begin, we recommend to set COUNTER to TIME CODE in the menu system
so that you can view the RC time code.
(
1
)
While pressing the small green button on the POWER switch, set it to VTR.
(
2
)
Rewind the tape to the beginning and set the camcorder to playback pause
mode.
(3) Press TIME CODE WRITE on the Remote Commander. The TIME CODE
WRITE indicator appears in the viewfinder or on the LCD screen with the
WRITE indicator flashing.
(4)
Press or
II
to start playback. The WRITE indicator stops flashing and the
RC time code writing starts from 0:00:00:00.
S TIME CODE
WRITE
IcttiWicj
o
►II
TI^4B^.^Q(>E
-
writ
C-
4 II PAUSE
bS^r,
1-''" 1
b
0:00:00:01
TIMECODE
WRITE
To stop writing the RC time code
Press ■ (or any video control button).
To write the RC time code from the end of the RC time code
recorded portion
Rewind the tape to the portion on which the RC time code has been written and set the
camcorder to playback pause mode. Then follow steps 3 and 4 above. The RC time
code is written continuously.
54