Bebdasb»-:; .; jr-rfi, M щш – Sony CCD-FX410 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

BEBDasB»-:;

.; jr-rfi’?"

When you have finished charging the battery, install the battery pack as follows;

1 Align the flat side of the battery pack with the white line on the camcorder.

2 Make sure that the arrow on the battery pack is close to the top of the camcorder.
3 Push down and slide the battery pack in the direction of the arrow.

Notes
• Make sure the battery is securely installed so that it does not fall. If the battery is not

installed properly, the camcorder will not record accurately.

• You can use the AC power adaptor as a power source when recording indoors.

To remove the battery pack

Slide ВАТТ in the direction of the arrow, and at the same time, slide out the battery pack
to the left.

Getting Started

-M

Щш

■i-'M

■ I