Sony CCD-FX410 - Manual (Page 47)

Playing Back
In the earlier section (page 20), we've explained the basic connection to your TV.
Here, we will talk about several other ways of connection to TV depending on the type of
TV you have.
You can easily make a proper connection of camcorder and TV by using the supplied
AC-V60A AC power adaptor.
If you connect a TV not equipped with video/audio inputs, see page 20.
Connecting a TV with Video/Audio Inputs
How to connect a TV with video/audio inputs
Use the supplied AC-V60A AC power adaptor and A/V connecting cable to connect to the
TV. Make sure that the TV is turned off to prevent damage to the speaker.
1 Connect Video and Audio using the A/V cable between TV and AC power adaptor.
If your TV is a monaural type, use the VMC-710M/720M A/V connecting cable (not
supplied).
2 Connect the AC power adaptor to a wall outlet.
3 Attach the connecting plate of the AC power adaptor to the camcorder.
4 Set the CHARGE/VTR selector on the AC power adaptor to VTR (DC OUT).
Note
Perform only steps 3 and 4 when playing back a tape. You can keep the AC power
adaptor and the TV connected when playing back a tape.
Advanced Camera Operation
47