Turn standby up, At the desired point, release editsearch, Press start/stop – Sony CCD-FX410 User Manual
Page 33: To pause recording, To stop recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re-recording on a Previously Recorded Portion (EDiTSEARCH)
You can reshoot a scene over the last recorded portion using EDiTSEARCH. The
previously recorded portion will be erased.
2
,
1
Turn STANDBY up.
START/STOP
Look in the viewfinder and find the point from
where you want to begin recording by:
Keep pressing the + side of EDITSEARCH
continuously to advance the picture at a normal
playback speed, or the - side to reverse the picture.
+ EDITSEARCH -©
At the desired point, release EDiTSEARCH.
Press START/STOP.
Recording begins from the point you released
EDITSEARCH.
A smooth transition between scenes can be made
after the pre-recorded portion even if STANDBY is
turned down and turned up, or even it the power is
turned off and on again, provided that the tape is not
removed.
To pause recording
Press START/STOP again.
To stop recording
Turn STANDBY down.
Advanced Camera Operation
33