Using your camcorder abroa, Power sources, Difference in color system – Sony CCD-FX410 User Manual
Page 63: Ntsc system countries, Pal system countries, Pal m system country, Pal n system countries, Secam system countries
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using Your Camcorder Abroa
Each country has its own electricity system and TV color system. Before using your
camcorder abroad, check the following points.
Power Sources
You can use your camcorder in any country with the supplied AC power adaptor within
110 V to 240 V A C , 50/60 Hz.
Difference In Color System
This camcorder is an NTSC system based camcorder. If you want to view the playback
picture on a TV, it must be an NTSC system based TV or a PAL-M system based TV with
NTSC/PAL-M transcorder. Check the following alphabetical list.
NTSC system countries
Bahama islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,
Japan, Korea, Mexico, Peru, Surinam, Taiwan, The Philippines, U.S.A., Venezuela, etc.
PAL system countries
Australia, Austria, Belgium, China, Denmark, Finland, Germany (former West Germany),
Great Britain, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway,
Portugal, Singapore, Spain, Sweden, Switzerland, Thailand, etc.
PAL M system country
Brazil
PAL N system countries
Argentina, Paraguay, Uruguay
SECAM system countries
Bulgaria, France, Guiana, Hungary, Iran, Iraq, Monaco, Poland, former Soviet Union, etc.
ESSKr".
On operation
Operate the camcorder on 6.0 V (battery pack) or 7.5 V (AC power adaptor).
For DC or AC operation, use the accessories recommended in this manual.
Should any solid object or liquid fall into the casing, unplug the camcorder and have it
checked by qualitied personnel before operating it any further.
Do not hold the camcorder by the viewfinder or the microphone.
Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Keep the lens cap on the lens when not using the camera.
Do not wrap up the camcorder and operate it since heat may build up internally.
Keep the camcorder away from strong magnetic fields or mechanical vibration.
Do not let sand get into the camcorder.
When you use the camcorder on a sandy beach or dusty place, protect it from the sand
or dust. Sand or dust may cause the camcorder to malfunction and sometimes the
malfunction cannot be repaired.
Do not let the camcorder get wet.
Keep the camcorder from rain or sea water. It may cause malfunction and sometimes
the malfunction cannot be repaired.
Additional Information
63
al
i
■p
'■1
I
' I