To check the time remaining of the tape – Sony CCD-FX410 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■illiil»

To check the time remaining of the tape

Press TAPE/BATT CHECK.

S [ -

] E -

-►S[

■►S[

Omin

\ I /

-Omin -

/ I N

-5min

4min -

Tape length indicator

After pressing TAPE/BATT CHECK, the time remaining may not be indicated for about 20
seconds. When the time remaining is less than about 5 minutes, the indicator indicates the

minutes remaining.

Wlien "5 min” lights, the indicator appears in the viewfinder and blinks.

Note on the tape length indicator
• The camcorder must be in the recording or playback mode when the TAPE/BATT CHECK is

pressed to find out the time remaining. In the playback mode, however, the indicator does not
indicate the minutes remaining.

• The tape length indicator does not change while using EDITSEARCH.

fs;/:

■ ■ f.;A

ffl

Basic Camera Operation “| Q