Press zero mem, Press ii of both units to start insert editing, To change the end point – Sony CCD-FX410 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

r*/

Locate the start point where the insert should

begin by pressing

At the start point, set the camcorder

into recording pause mode.

PAUSE

Press ZERO MEM.

The end point of the insert is stored
in memory.

Press II of both units to start insert editing.

You can monitor the picture being inserted in the
viewfinder screen.

REWS

• REC-

•

I t )

-ZER O M EM

/ 1 ^

PAUSE

The insert recording will stop automatically near the zero point on the counter.

To change the end point

Press ZERO MEM so that the ZERO MEM indicator disappears, and operate again from

step 2.

Advanced Camera Operation