Sony CCD-FX410 - Manual (Page 14)

Setting the Date and Time
Now, let's adjust the clock Inside the camcorder to be able to superimpose date and time
onto your video.
Make sure that power source and lithium battery are attached.
3,4,5,6
1
Press the small green button on
POWER and slide POWER to CAMERA.
I mmeba / off \ vtr
POWER
Turn STANDBY up. i
S T A R T / S T O P
Press DATE (+) and TIME ( N E X T )
simultaneously for a few
seconds until the date indicator
appears in the viewfinder.
DATE button now functions as + (to
advance numbers) and TIME button
functions as NEXT (to set).
DATFd*) TIMEiNEXD
Adjust the flashing digits of
the year, month, day, and
hour using DATE (+), and
press TIME (NEXT).
Notes
• When you keep DATE (+)
pressed, the digits advance
faster.
• The year starts at 1992 and
proceeds as follows:
1992 - 1999^2000 - - - ^ 2020
i____________________ I
\ I /
J A N
0
0
t
D.
O rUdi
\ I /
-^(^(,.-1 ,99 2j
TIMEfNEXn
if
J U L " > 4 “ 1 9 9 2 ,
n '/
y S ^ O 0 0 P M
5 Adjust the flashing digits of minute using
DATE(*t
DATE {+).
9-30-eoPMj
O —
6 Press TIME (NEXT) to set the second to “00”.
TIME'NLXT
The clock starts operating. o
To correct date and time setting
Repeat steps 3 to 6.
"I 4 Getting Started