Sony CCD-FX410 - Manual (Page 30)

Camera Recordi fir '
I
1 ^
Putting an Age on Your Tape
Here's how to put the age of your children in your video while recording.
1
During recording, press START/STOP at the
point where you want to insert the age of a
person or the elapsed time.
This puts the camcorder in the standby mode.
Press AGE/EVENT to select the indicator
you want to record.
Each time you press AGE/EVENT, the indicator
changes as follows:
No indicator [T] The first age T i
[ 3 ] The third age ^ [f] The second age
An item with no presetting is skipped.
The [T], [
2 ], or [ 3 ] indicator goes out after
one second.
Press START/STOP.
Recording starts again.
The indicator in the viewfinder is recorded with the
picture.
AGE/EVENT
Note
You cannot add the age later during playing back or editing.
To stop recording the age
Press AGE/EVENT until the indicator goes out.
To change the display while recording
Press AGE/EVENT until the indicator you want to record is displayed. Recording of the
indicator you select starts when [T], [U, or [ 3 ] goes out.
To cancel the stored birth date
1 Perform steps 1 to 4 in “Storing a Birth Date in Your Camcorder” on page 15, to select
the memory number to be canceled.
2 Press TIME (NEXT) twice. The month indicator blinks.
3 Press DATE (+) until “----- ” appears.
4 Press TIME (NEXT).
The birth date is deleted trom the memory and is not displayed when you press AGE/
EVENT.
30
Advanced Camera Operation