Sony DHC-MD313 - Manual (Page 6)

step 2: Setting the
time
You can sot the time, when you turn ott the
system power. You must set the time before
you can use the timer functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The European model is used for illustration
purpose.
2,4
CURSOR 4 -
1
Press CLOCK/TIMKR SET.
The clock appears and tire houi
indication flashes.
2
Press+/-to set the hour.
3
Press ENTER / YES or CURSOR ■
The minute indication flashes.
4
Press + / - to set the minute.
5
Press ENTER/YES.
The clock starts.
If you have made a mistake
Press CURSOR or ^ repeatedly so that
the incorrect item flashes, then set it again.
To change the preset time
When you turn off the system power, you can
change the preset time.
1 Press CLOCK/TIMER SET.
2 Press
+ / - repeatedly until "CLOCK SET?"
appears.
3 Press ENTER/YES.
4 Repeat steps 2 through 5.
Tips
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).