To cancel labelling, To check the titles, To erase the name – Sony DHC-MD313 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Press ENTER/YES.
The cursor starts hashing.
Labelling the preset stations
(continued)
Cursor
Press CHARACTER repeatedly
until the type of character you want
appears.
Each time you press the button, the
display changes as follow:
A (Upper case) —► a (Lower case) —► 0
(Numbers) —► ! (Symbols)* —► i. j (Space)
-►A...
* You can use the following symbols.
6
Press + /- repeatedly until the
desired character appears.
To enter a blank space, skip this step.
7
Press CURSOR
The character you selected in step 6 stops
flashing and the cursor shifts to the right.
Cursor
8
Repeat steps 5 through 7 to
complete the entire title.
If you enter an incorrect character, press
CURSOR or ^ until the character
you want to change flashes, then repeat
steps 5 through 7. To erase a character,
press CANCEL/NO while the character
is flashing.
9
Press ENTER/YES to compalete the
labelling procedure.
To cancel labelling
Press EDIT.
To check the titles
Press DISPLAY.
Each time you press the button, the display
changes as follows:
The station name •<—► Frec^uency
To erase the name
Start over from steps 1 through 5 and press
CANCEL/NO repeatedly until the label
disappears.
46