Sony DHC-MD313 - Manual (Page 32)

starting recording with 6 seconds
of prestored audio data
(continued)
1
Insert a recordable MD.
2
Press FUNCTION repeatedly to
select the source (e.g., TUNER) you
want to record.
3
Press # REC.
The deck stands by for recording.
4
Start playing the source you want to
record.
5
Press ENTER/YES on the remote at
the point you want to start
recording.
Recording of the source starts with the
6 seconds of audio data stored in the
buffer memory.
If you use an MD with tracks already
recorded on it, the MD deck
automatically locates the end of the
recorded portion and starts the new
recording from there.
While "TOC" is lit or is flashing
d o ensure conrplete recording, do not move
the deck or pull out the mains lead. I he deck
updates the Table of Contents ( TOC) while
"TOC" is flashing.
Notes
• rhe MID recording is complete only alter all the
recording intcrrmation is entered to TOC at which
point roc stops flashing and goes out. Be careful
disconnect the mains lead or move the deck before
this point. Before disconnecting the mains lead, do
the following:
- Remove fhe MD.
- Press POWER, fo turn off the system.
• The MD deck starts storing audio data when the
deck is in recording pause in step 3 and you start
plaving the source. If vou press EN l ER/YES on
the remote within b seconds of this point then
Time Machine Recording starts with less than 6
seconds of audio data.
To stop Time Machine Recording
Press MD □.
32