Sony DHC-MD313 - Manual (Page 37)

Labelling an MD
—
Name Function
It you . 1 labok'd CD on a now MD, tho title is
automatically recorded on the MD (Disc
Memo Copy tunctiim). ^'ou can alsrr create
titles (names) tor your recorcied MDs and
tracks. You can use up to 1,700 characters for
a disc.
MD ► ► )/!◄ ◄
SCROLL
CANCELVNO
1
To lavel a disc, press MD ■ to stop
playing the disc.
To lavel a track, press MD or
until the desired track number appears.
2
Press EDIT then press+/-
repeatedly until "Name in ?"
appears.
3
Press ENTER/YES.
The cursor starts flashing.
Press CHARACTER repeatedly
until the type of character you want
appears.
bach time \’ou press the button, the
display changes as follows:
A (Upper case) —► a (Lower case) —► 0
(Numlx'rs) —► ! (Symbols)* —► , . (Space)
~>A...
* You can use the following symbols.
Press +/ - repeatedly until the
character you want appears. ^
To enter a blank space, skip this step.
Press CURSOR
The character you selected in step 5 stops
flashing and the cursor shifts to the right.
m ITOCEDITI LEVEL-SYNC
DISC
Repeat steps 4 through 6 to
complete the entire title.
If you enter an incorrect character,
pressCURSOR ^ or ^ until the
character you want to change flashes,
then repeat steps 4 through
6 .
To erase a character, press
CANCEL / NO while the character is
flashing. You cannot insert characters
between previously inserted characters.
8
Press ENTER/YES to complete the
labelling procedure.
The titles you labelled appears
sequentially, then the display returns to
the original.
To cancel labelling
Press EDIT.
1Ш ITOCEPITI
DISC
CURSOR continued
37