Tomei Powered STRAIGHT FRONT PIPE - Manual (Page 7)

- 7 -
● Installation of the production is to be carried out after the instructions are carefully read.
● For further reference, compare this instruction sheet with the authentic Nissan Motor Corporation workshop manual.
● After installation, keep this copy for future reference.
● Be sure to give a copy of this instruction manual to the customer.
Thank you for the purchase of this TOMEI product.
The TOMEI straight front pipe is an effective exhaust component, which allows for a more efficient exhaust flow.
This component is being sold as an off road vehicle attachment and should only be used on close cirscuit cou
rses..
Kit Contents
Please confirm that your outlet pipe kit is complete.
Each package is label showing the quantity of each package.
Gasket A (2) Gasket B (2)
※Between Straight front pipe ※Between Manifold
and Straight front pipe. andanExhaust front tube.
Flange bolt Flange nutト Bolt smooth
(8) (8) Paste (1) M10*1.5 M10*1.5
Main body of straight front pipe Blind bolt (2) Copper washer (2) Sticker (2)
(Right/Left)
Note) In a set with Exhaust Manifold, Gasket B is not contained in a kit.
Tools required for installation
The following tools are necessary for the installation.
・Tool kit for maintenance ・ Torque wrench ・Service instruction
Caution
■ This product is only for vehicle use under a closed circuit and for public roads.
■ The technician for this installation must be a licensed mechanic, which holds a thorough understanding for installations..
■ Only install this product on the specific model as stated above. If installed on a different model, possible engine damage will
occur.
■ Only use the proper tools during installation. If the wrong tools are used you risk possible injury.
Warning
■ Install this item when the engine is cold.
■ Install all kit components of a possible engine fire may result.