Taylor-Wharton CS Series - Manual (Page 36)

34
CS SERIES
DUMP ERROR LOGS is accessible through the menu system of the control. This
option sends data from the error logs to the serial port of the freezer. When this
option is chosen, the display reports how many error logs are in the system. While
the data is being sent out the serial port, it can be paused or completely cancelled
through the menu system.
DUMP TEMP LOG #1 and TEMP LOG #2 are accessible through the menu system
of the control. This option sends data from the temperature logs to the serial port of
the freezer. When this option is chosen, the display reports how many temperature
logs are in the system. While the data is being sent out the serial port, it can be
paused or completely cancelled through the menu system.
Error Logs
SENS. ERR. LOGGING is accessible through the menu system of the control. This
menu choice turns on/off the logging of all sensor errors. The choices are ENABLE
or DISABLE. Records data in the error log.
LOW LN
2
SUPPLY LOGGING is accessible through the menu system of the control.
This menu choice turns on/off the logging of the low LN
2
supply error. The choices
are ENABLE or DISABLE. Records data in the error log.
REMOTE ALARM LOGGING is accessible through the menu system of the control.
The menu choice turns on/off the logging of the remote alarm activation. The
choices are ENABLE OR DISABLE. Records data in the error log.
OPEN THERMOCOUPLE LOGGING is accessible through the menu system of the
control. This menu choice turns on/off the logging of the thermocouple open alarm.
The choices are ENABLE and DISABLE. Records data in the error log.
HIGH TEMP #1 LOG is accessible through the menu system of the control.
This menu choice turns on/off the logging of the high temperature alarm for
Thermocouple #1. The choices are ENABLE and DISABLE. Records data in the error
log.
HIGH TEMP #2 LOG is accessible through the menu system of the control. This menu
choice turns on/off the logging of the high temperature alarm for Thermocouple
#2. The choices are ENABLE and DISABLE. Records data in the error log.
System Logs
FILL LOGGING is accessible through the menu system of the control. This menu
choice turns on/off the logging of tank filling operations. The choices are ENABLE or
DISABLE. Records data in the system log.
LID ACTION LOGGING is accessible through the menu system of the control. This
menu choice turns on/off the logging of lid openings and closings. The choices are
ENABLE or DISABLE. Records data in the system log.
USER ACCESS LOGGING is accessible through the menu system of the control. This
menu choice turns on/off the logging of user access codes, which are requested
when the lid is opened. Records data in the system log.
Temperature Logs
Temperature Logging Rates for thermocouple #1 (T/C #1 LOGGING) and
thermocouple #2 (T/C #2 LOGGING) are accessible through the menu system of
the control. This menu choice adjusts the rate at which temperatures are logged for
the two thermocouples. The possible choices are Disabled, 15, 30 minutes, 1, 2, 4,
6, 12 or 24 hours. Records data in the temperature logs.