beautypg.com

Taylor-Wharton Tipping Stand User Manual

Tipping stand, Assembly instructions

background image

Assembly Instructions

TW-41C

This accessory is intended to provide mobility and assist in transferring liquid nitrogen from the model LD25,
25LD or the CLASSIC-T Dewar. The easy-to-assemble stand has a 5 wheel cast-aluminum dolly for handling
convenience and side brackets to support the weight of the Dewar while you tip the unit forward to pour. When
not in use, the weight of the contents returns the Dewar to an upright position. To position the Dewar in the
stand, secure the unit in the pivot ring so that it balances itself upright when in storage or travel and yet allows
you to safely control the unit while pouring.

Caution: Avoid liquid nitrogen over-filling. Adhesives that are
subjected to extreme cold should be inspected and, if needed,
should be replaced.

LIQUID NITROGEN CAN PRESENT HAZARDS THAT RESULT
IN PERSONAL INJURY. To protect yourself and others, read
TW-10 “Handle with Care”, and the Operating Instructions that
are provided with Dewar.

Assembly Instructions

Slide the support brackets down, over the smooth roller
base pegs
, so that the pivot ring supports are directed
inward.

Remove the nut on the pivot ring to loosen the assembly.
Position the Dewar in place, leaving one corrugation showing
above the ring. Tighten the nut back into place.

Slide the pivot ring assembly into place and press down into
position. If necessary, reposition the Dewar in the pivot ring to
get the proper balance described above.

REPLACEMENT PARTS

Description

Part Number

Roller Base ....................................................................D025-8C10
Support Bracket, Left .....................................................D025-9C19
Support Bracket, Right ...................................................D025-9C20
Caster, Standard ........................................................... .7300-8069
Caster, Locking ............................................................ ..7300-8072
Pivot Ring Assembly ......................................................D225-8C22
Caster Insert ................................................................ ..7300-8068

Taylor-Wharton

4075 Hamilton Blvd.

Theodore, AL 36590-0588

Phone: (251) 443-8680

(800) TW TANKS (898-2657)

Fax: (251) 443-2250

www.taylorwharton.com

Tipping Stand Drawing

TIPPING STAND