Cabletron Systems 6H122-16 - Manual (Page 39)

Using the RESET Button
6H122-16 User’s Guide 4-7
4.3 USING THE RESET BUTTON
The RESET button, located near the upper plastic locking tab of the
module (see
Figure 4-2 ), resets the 6H122-16 processor without affecting
the NVRAM.
Figure 4-2 RESET Button
To reset the 6H122-16 processor, press and release the RESET button.
The module processor goes through a reset process of approximately 20
seconds. Additional downtime may be added as the module reenters the
network.
!
CAUTION
Pressing the RESET button resets the device, and all current
switching being performed by the module is halted. A module
downtime of up to two minutes will result from this action.
Reset Button RESET
6H122-16
FAST ENET