Cabletron Systems 6H122-16 - Manual (Page 110)

Chapter 5: Local Management
5-70 6H122-16 User’s Guide
5.20 MODULE SPECIFIC CONFIGURATION MENU
SCREEN
The Module Specific Configuration menu screen, Figure 5-29 , allows the
user to select one of up to five screens to configure ports or check system
resources specific to the 6H122-16.
To access the Module Specific Configuration menu screen from the
Module Configuration Menu screen, use the arrow keys to highlight the
MODULE SPECIFIC CONFIGURATION menu item and press
ENTER. The Module Specific Configuration menu screen displays.
NOTE
The BROADCAST SUPPRESSION menu item on the Module
Specific Configuration menu screen may not display if the
operational mode of the module has been set to SECURE
FAST VLAN. The PORT REDIRECT menu item may not
display if the operational mode of the module has been set to
802.1Q.
Refer to your Release Notes to see if the functionality provided
by the above screens is supported.
Section 5.15.9 provides instructions on setting the operational
mode.