The port redirect function screen, Figure 5-32, Allo – Cabletron Systems 6H122-16 User Manual
Page 120: Source port (read-only), Destination port (read-only), Remap errors (read-only), Source port [ n] (selectable), Destination port [ n] (selectable)
Chapter 5: Local Management
5-80
6H122-16 User’s Guide
Figure 5-32
Port Redirect Function Screen
The following definitions briefly explain each field of the Port Redirect
Function screen:
Source Port (Read-only)
Shows which ports are currently set as source ports.
Destination Port (Read-only)
Shows which ports are currently set as destination ports.
Remap Errors (Read-only)
Displays whether the corresponding source ports are configured to send
errored frames to the destination ports (ON), or to drop all errored frames
before forwarding traffic (OFF).
Source Port [
n] (Selectable)
Allows a selected port [n] to be changed to a source port.
Destination Port [
n] (Selectable)
Allows a selected port [n] to be changed to a destination port.
Firmware Revision: XX.XX.XX
Port Redirect Function
BOOTPROM Revision: XX.XX.XX
Source Port
1
2
1
--
--
--
--
--
Destination Port
5
6
6
--
--
--
--
--
Module Type: 6H122-16
Slot Number:
X
Remap Errors
ON
ON
OFF
--
--
--
--
--
------------------
----------------------
---------------------
2361_26
6C105 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN
Source Port [1]
Destination Port [1]
Status [ADD]
EXIT
Errors [ON]